Installing and configuring FFmpeg and FFpeg-Php

[Bharat]

is a complete solution to record, convert and stream audio and video segments. It includes libavcodec, the leading audio/video codec library.
NOTES:

• This guide had been used effectively on several Web production servers with CentOS v5.x and Red Hat v4/5, however there are some which might not be compatible.
• Although this guide is designed for a Linux i386 powered server, it might work on a 86_64 system -- (proceed at your own risk.)
• If you experience any problems installing FFmpeg and FFmpeg-Php on your server and need help, just PM me or reply in thread i'll install for you .

There are two methods to install FFmpeg and FFmpeg-Php, their libraries, and modules:

1. Our preferred method is to use Yum on systems including Red Hat, CentOS, and Fedora Core.
2. Manually, from source archives/packages --�NOT RECOMMENDED (proceed at your own risk.)

*** Caution

• You must remove all previous installation of FFmpeg and FFmpeg-Php, then follow installation instructions below.
• Follow these steps (in that order):

Method #1: Using yum

First, make sure the following binary packages are installed on your server:

gcc, gcc4, gcc4-c++, gcc4-gfortran, gd, gd-devel, gmake, ImageMagick, ImageMagick-devel, libcpp, libgcc, libstdc++, make, ncurses, ncurses-devel, ruby, subversion

If any of these packages are missing, install them using Yum . For example:

• yum install PACKAGE

1. Install rpmforge repository. Follow the instructions on CentOS Wiki
   
   • wget http://pkgs.repoforge.org/rpmforge-r...l5.rf.i386.rpm
   • rpm -ivh rpmforge-release-0.5.2-2.el5.rf.*.rpm
   
   
2. Install ffmpeg, mplayer, mencoder with all supported libraries/modules
   
   • yum -y install ffmpeg ffmpeg-devel mplayer mencoder flvtool2
   
   
3. Manually, install FFmpeg-Php
   
   • cd /usr/local/src
   • wget http://garr.dl.sourceforge.net/sourc...php-0.6.0.tbz2
   • tar jxvf ffmpeg-php-0.6.0.tbz2
   • cd ffmpeg-php-0.6.0
   • phpize
   • ./configure
   • make
   • make install
   
   

If FFmpeg-Php is compiled successfully, an ffmpeg.so module will be generated and copied into the default Php directory. Next,�run the following command to enable FFmpeg-Php. By running this command you will be�adding ffmpeg.so module into the�php.ini file:

echo 'extension=ffmpeg.so' >> /local_path_to_your/php.ini

Final step, restart apache

service httpd restart
OR
/etc/init.d/httpd restart

- Testing FFmpeg

Verify that FFmpeg is working properly by running the following two commands:

• php -r 'phpinfo();' | grep ffmpeg

You will get a few lines similar to the following:

ffmpeg
ffmpeg-php version => 0.6.0-svn
ffmpeg-php built on => April� 15 2010 15:31:45
ffmpeg-php gd support� => enabled
ffmpeg libavcodec version => Lavc51.62.0
ffmpeg libavformat version => Lavf52.18.0
ffmpeg swscaler => disabled
ffmpeg.allow_persistent => 0 => 0
ffmpeg.show_warnings => 0 => 0

This is the second command to make sure that FFmpeg is working properly:

• /usr/local/bin/ffmpeg

If you do not get any errors after running the test commands above, FFmpeg, FFmpeg-Php, MPlayer, MEncoder, and FLV2tool are working properly on your server. CONGRATULATIONS!



Method #1: Source archives/packages

*** Caution

• You must remove all previous installation of FFmpeg and FFmpeg-Php, then follow installation instructions below.
• Follow these steps (in that order):

First, make sure the following binary packages are installed on your server:

gcc, gcc4, gcc4-c++, gcc4-gfortran, gd, gd-devel, gmake, ImageMagick, ImageMagick-devel, libcpp, libgcc, libstdc++, make, ncurses, ncurses-devel, ruby, subversion

If any of these packages are missing, install them using Yum . For example:

• yum install PACKAGE

*** Caution

• The following source packages are always updated with newer versions. You might experience technical issues if you download and install a newer/older version of any of these applications.
• You must remove all previous installation of FFmpeg and FFmpeg-Php, then follow installation instructions below.

To install FFmpeg from source, execute the following commands (in that order).

1. Let's create a directory to do our work in:
   
   • mkdir /usr/local/src
   • cd /usr/local/src
   
   
2. Download source packages
   
   • wget http://liba52.sourceforge.net/files/a52dec-0.7.4.tar.gz
   • wget http://ftp.penguin.cz/pub/users/utx/....0.0.2.tar.bz2
   • wget http://ftp.penguin.cz/pub/users/utx/....0.0.2.tar.bz2
   • wget http://www3.mplayerhq.hu/MPlayer/rel...071007.tar.bz2
   • wget http://downloads.sourceforge.net/pro...c-1.28.tar.bz2
   • wget http://downloads.sourceforge.net/pro...ad2-2.7.tar.gz
   • wget http://biznetnetworks.dl.sourceforge...php-0.6.0.tbz2
   • wget http://rubyforge.org/frs/download.ph...ool2-1.0.6.tgz
   • wget http://downloads.sourceforge.net/pro...-3.98.4.tar.gz
   • wget http://downloads.xiph.org/releases/o...g-1.1.4.tar.gz
   • wget http://downloads.xiph.org/releases/t...-1.1.1.tar.bz2
   • wget http://downloads.xiph.org/releases/v...s-1.2.2.tar.gz
   • wget http://downloads.sourceforge.net/pro...-0.13.5.tar.gz
   • wget http://download.m0k.org/handbrake/co...e-1.1.3.tar.gz
   • wget http://downloads.videolan.org/pub/vi...4-2245.tar.bz2
   
   
   
   
3. Extract source packages
   
   • tar xzf a52dec-0.7.4.tar.gz
   • tar jxvf amrnb-7.0.0.2.tar.bz2
   • tar jxvf amrwb-7.0.0.2.tar.bz2
   • tar jxvf essential-ppc-20071007.tar.bz2
   • tar jxvf faac-1.28.tar.bz2
   • tar xzf faad2-2.7.tar.gz
   • tar jxvf ffmpeg-php-0.6.0.tbz2
   • tar zxvf flvtool2-1.0.6.tgz
   • tar xzf lame-3.98.4.tar.gz
   • tar xzf libogg-1.1.4.tar.gz
   • tar jxvf libtheora-1.1.1.tar.bz2
   • tar xzf libvorbis-1.2.2.tar.gz
   • tar xzf re2c-0.13.5.tar.gz
   • tar xzf xvidcore-1.1.3.tar.gz
   • tar jxvf x264-snapshot-20080324-2245.tar.bz2
   
   
4. Create the codecs directory & export files
   
   • mkdir /usr/local/lib/codecs
   • mv /usr/local/src/essential-ppc-20071007/* /usr/local/lib/codecs
   • chmod -R 755 /usr/local/lib/codecs
   • echo "/usr/local/lib" >> /etc/ld.so.conf
   • ldconfig
   
   
5. Install SVN and Ruby (for RedHat/CentOS v5.x)
   
   • yum install subversion
   • yum install ruby
     OR (if you are using the cPanel control panel)
     
     • /scripts/installruby
     • /usr/local/cpanel/bin/ror_setup
     
     
   • yum install ncurses-devel
   
   
6. Compile and install FLVtool2
   
   • cd /usr/local/src/flvtool2-1.0.6/
   • ruby setup.rb config
   • ruby setup.rb setup
   • ruby setup.rb install
   
   
7. Compile and install LAME
   
   • cd /usr/local/src/lame-3.98.4
   • ./configure
   • make
   • make install
   
   
8. Compile and install libOGG
   
   • cd /usr/local/src/libogg-1.1.4
   • ./configure
   • make
   • make install
   • PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
   • export PKG_CONFIG_PATH
   
   
9. Compile and install LibVorbis
   
   • cd /usr/local/src/libvorbis-1.2.2
   • ./configure
   • make
   • make install
   
   
10. Compile and install Libtheora
    
    • cd /usr/local/src/libtheora-1.1.1
    • ./configure --with-ogg-libraries=/usr/local/lib/
    • make
    • make install
    
    
11. Compile and install amrNB
    
    • cd /usr/local/src/amrnb-7.0.0.2
    • ./configure
    • make
    • make install
    
    
12. Compile and install amrWB
    
    • cd /usr/local/src/amrwb-7.0.0.2
    • ./configure
    • make
    • make install
    
    
13. Compile and install Liba52
    
    • cd /usr/local/src/a52dec-0.7.4
    • ./bootstrap
    • ARCh='arch'
    • ./configure --enable-shared
    • make
    • make install
    
    
14. Compile and install FAAC
    
    • cd /usr/local/src/faac-1.28
    • ./bootstrap
    • ./configure --with-mp4v2
    • make
    • make install
    
    
15. Compile and install FAAD
    
    • cd /usr/local/src/faad2-2.7
    • ./configure --with-mpeg4ip
    • make
    • make install
    
    
16. Compile and install XVIDCore
    
    • cd /usr/local/src/xvidcore/build/generic/
    • ./configure
    • make
    • make install
    
    
17. Compile and Install�X264 Snapshot
    
    • cd /usr/local/src/x264-snapshot-20080324-2245
    • ./configure --enable-shared
    • make
    • make install
    
    
18. Compile and install RE2C
    
    • cd /usr/local/src/re2c-0.13.5
    • ./configure
    • make
    • make install
    • cp -aP /usr/local/bin/re2c /usr/bin/
    
    
19. Download the latest release for FFmpeg and MPlayer from svn.mplayerhq.hu
    
    • cd /usr/local/src
    • svn checkout svn://svn.mplayerhq.hu/ffmpeg/trunk ffmpeg -r 15594
    • svn checkout svn://svn.mplayerhq.hu/mplayer/trunk mplayer
    • svn update
    
    
20. Compile and install MPlayer
    
    • cd /usr/local/src/mplayer
    • ./configure
    • make
    
    (STOP here.) Make sure MPlayer has been compiled successfully with NO errors. Do NOT proceed any further unless the MPlayer package has been compiled successfully.
    
    • make install
    
    
21. Compile and install FFmpeg
    
    • cd /usr/local/src/ffmpeg/
    • mkdir /usr/local/src/ffmpeg/tmp
    • export TMPDIR=/usr/local/src/ffmpeg/tmp
    
    (The following ./configure command is one single line)
    
    • ./configure --enable-shared --enable-nonfree --enable-gpl --enable-pthreads --enable-liba52 --enable-libamr-nb --enable-libamr-wb --enable-libfaac --enable-libfaad --enable-libmp3lame --enable-libtheora --enable-libvorbis --enable-libx264 --enable-libxvid --enable-cross-compile
    • make
    
    (STOP here.) Make sure FFmpeg has been compiled successfully with NO errors. Do NOT proceed any further unless the FFmpeg package has been compiled successfully.
    
    • make install
    • export LD_LIBRARY_PATH=/usr/local/lib/
    
    
22. Finalize the codec setups:
    (Create symbolic links for the following modules. FYI: the number which comes after the extension *.so might differ from one server to another. The X's represent numbers. The number after *.so.5 must match the number after the *.so.5 at the end of the line.)
    
    • ln -s /usr/local/lib/libavformat.so.5X.XX.0 /usr/lib/libavformat.so.5X
    • ln -s /usr/local/lib/libavcodec.so.5X.XX.0 /usr/lib/libavcodec.so.5X
    • ln -s /usr/local/lib/libavutil.so.49.X.0 /usr/lib/libavutil.so.49
    • ln -s /usr/local/lib/libmp3lame.so.0 /usr/lib/libmp3lame.so.0
    • /sbin/ldconfig
23. Compile and install FFmpeg-Php
    
    • cd /usr/local/src/ffmpeg-php-0.6.0/
    • /usr/bin/phpize
    • ./configure
    • make
    
    (STOP here.) Make sure FFmpeg-Php has been compiled successfully with NO errors. Do NOT proceed any further unless the FFmpeg-Php package has been compiled successfully.
    
    • make install
      Verify that ffmpeg-php module is saved in the Php extensions directory by running:
    • ls -al /usr/local/lib/php/extensions/no-debug-non-zts-20060613/ffmpeg.so
    
    
24. Add FFmpeg-Php module directive in php.ini file: (make sure the local path to your php.ini is correct.)
    
    • echo 'extension=ffmpeg.so' >> /usr/local/lib/php.ini
25. Restart Apache to load FFmpeg-Php (for RedHat/CentOS v5.x)
    
    • service httpd restart
    
    

- Testing FFmpeg
Verify that FFmpeg is working properly by running the following two commands:

• php -r 'phpinfo();' | grep ffmpeg

You will get a few lines similar to the following:

ffmpeg
ffmpeg-php version => 0.6.0-svn
ffmpeg-php built on => April� 15 2010 15:31:45
ffmpeg-php gd support� => enabled
ffmpeg libavcodec version => Lavc51.62.0
ffmpeg libavformat version => Lavf52.18.0
ffmpeg swscaler => disabled
ffmpeg.allow_persistent => 0 => 0
ffmpeg.show_warnings => 0 => 0

This is the second command to make sure that FFmpeg is working properly:

• /usr/local/bin/ffmpeg

If you do not get any errors after running the test commands above, FFmpeg, FFmpeg-Php, MPlayer, MEncoder, FLV2tool, LAME MP3 encoder & libOGG are working properly.



Regards

Bharat Reviewed by Bharat on 3rd Jan 2012. Installing and configuring FFmpeg and FFpeg-Php http://servertune.com/kbase/client/images/ffmpeg.png is a complete solution to record, convert and stream audio and video segments. It includes libavcodec, the leading audio/video codec library. NOTES: This guide had been used effectively on several Web production servers with CentOS v5.x and Red Hat v4/5, however there are some which might not be compatible. Although this guide is designed for a Linux i386 powered server, it might work on a Rating: 5

[ibby]

Y U make everything more complicated then it looks.and fix the �

[Bharat]

Y U make everything more complicated then it looks.and fix the �

hehe well i did copy paste from my word , and it looks fine on MS-Word . Anyways it looks good